back to previous page | Products Universal Trial Frame UB 6

Universal Trial Frame UB 6

Perfect Refraction

  • Six slots for each side: four in front, two behind
  • Anatomically designed nose piece for more comfort
  • Height- and depth adjustable nose bridge
  • Highlights
  • Video
  • Model
  • Technical Data
  • FAQ
  • Contact

Fashioned by hand – scrutinized by high-tech Coordinate Measuring Machines

The trial frame is one of the tools of the trade for every refraction professional. Subjective lens determination requires craftsmanship and manual skill. Your professional competence will be perfectly demonstrated with the new Universal Trial Frame UB 6. In the new product development of the UB 6 we put ergonomics, simple handling and optimal wearing comfort front and center.

OCULUS Universal Trial Frame UB 6
Proband mit OCULUS Universal-Messbrille UB 6
Einfache manuelle Refraktion mit der UB6 durch Rändelrad
Manuelle Refraktion mit der UB6 mit 6 Steckplätzen

The OCULUS Universal Trial Frame UB 6

Refraction in perfection

Now, we proudly present the UB 6, made of the finest materials and featuring a new design. Many ideas and suggestions for improvements from our customers have been integrated in the new development: for example, the nose piece and its adjustment options have a fully new construction. Also new is the lens holder, with four slots in front and two behind.
read more

The OCULUS Universal Trial Frame UB 6

Refraction in perfection

The result is a little masterpiece “Made by OCULUS” – developed according to state-of-the-art knowledge, optimized to fit your everyday practice, and based on more than 100 years of experience.
read more

The OCULUS Universal Trial Frame UB 6

Refraction in perfection

The UB 6 is the new generation in OCULUS trial frames. Carefully crafted by hand with the highest attention to detail. All materials are optimally fine-tuned in their coordination, inspected, and measured with our 3D-coordinate measuring machine.
read more

Universal Trial Frame UB 6 – Perfect Refraction

Model

OCULUS Universal Trial Frame UB 6

Trial lenses according to DIN EN ISO 9801 with a rim diameter of 38 mm (lens diameter 21 mm), such as the OCULUS trial lens “tl” (trial lens), are compatible with the Universal Trial Frame UB 3+, UB 4, UB 6 and Half-eye Trial Frames.

trial lens TL

You might also be interested in

Technical Data

Technical specifications

PD adjustment range 46 – 80 mm (1.9 – 3.2 in)
Scale division 2,5° gradation
Weight 60.2 g
Arm length 92 – 130 mm (3.7 – 5.1 in)
Tilt of arm (up/down) +12° / -14,5°
Lens holders, front 4
Lens holders, behind 2
Lens diameter 38 mm (1.5 in)
Rotary area (in front) 360°
VD measuring range 3 – 14 mm (0.1 – 0.6 in)

Optional

Polarizing filter linear 45°/135°
Polarizing filter circular

FAQ

Universal Trial Frames UB 3/UB 3+, UB 4 and UB 6 are all suitable for any trial lens conforming to DIN EN ISO 9801 and having a rim diameter of 38 mm, such as a OCULUS “tl” trial lens.
However, our Universal Trial Frame UB 5 for small heads requires trial lenses of the “tls” line with a diameter of 28 mm. These also conform to DIN EN ISO 9801 and are available nowhere in the world but from OCULUS.

The UB 5 was developed for small heads, which means that it will fit many adults as well, especially among the elderly. It has a PD range of 40-72 mm. In order to achieve such low PD values without changing the lens diameter (21 mm) it was necessary to reduce the rim diameter. That’s the simple idea behind the OCULUS UB 5: It’s ideally suited for small heads including those of children.

The UB 6 stands out for its trendy, modern design. The nose pad has been improved for better pressure distribution as well as in terms of adjustability. In addition, the front lens holder now offers four instead of the usual 3 slots, while the rear lens holder accommodates two lenses, as before.
Unique to the design of the UB 6 is the gradation of the scale for reading off the axis and base position, which is now in steps of 2.5°, allowing for greater reading accuracy. The operating elements now have an attractive conical design and are grooved to provide a better grip. Their somewhat harder material makes them more durable than those of earlier models.
The aluminium scales are absolutely abrasion-proof. Their high contrast makes for easy reading also in darkened rooms. The upward angled operating element for precise nose pad adjustment has been designed for easy use outside the test person’s field of view.
The flexible arms adapt to the shape of the ears and do not need to be adjusted.
All modifications and improvements were made in response to customer requests.

Yes, all spare parts are available. Please contact the distributor from whom you bought your trial frame.

Yes, all components of every one of our Universal Trial Frames are assembled manually with great precision. Here too, we stay true to our quality claim: Made in Germany – made by OCULUS.

Yes, polarizing filters are always optionally available. Those for the UB 6 have a clip for easy mounting, while those for the UB 4 and UB 5 are to be directly slipped onto the trial frame.
Polarizing filters with a clip as well as those of the slip-on type are for lateral mounting and can be easily flipped to the side when not needed.
On the UB 3/UB 3+ the polarizing filter has a central mount and can be simply removed after use. All linear polarizing filters are reversible.
Circular polarizing filters are available both with a clip and in a slip-on version.
There are also circular polarizing filters available in trial lens size for use in a slot of the rear lens holder if one should be free.

To mount the polarizing filter, insert the pin of the filter into the transverse borehole in the trial frame and push the pin in until it locks into the place the first time. This is the top position, and it is used for testing distance vision. To test near vision, push the polarizing filter all the way down until it locks into place in the bottom position. This procedure is also described in the instructions for use delivered with the polarizing filters.

If necessary we recommend cleaning your trial frames with a soft lint-free cloth only. To clean a heavily soiled trial frame you can use a damp cloth and a little household dishing-washing liquid. Never use alcohol, ether or similar solvents, let alone aggressive chlorinated, scouring or corrosive detergents.
For disinfection we recommend disinfection cloths such as Pursept®-A Xpress or Mikrozid® Sensitive Wipes from Schülke und Mayr GmbH. Please contact your OCULUS distributor so that they can order through OCULUS, or contact the source supplier directly: www.schuelke.com.

The UB 5. Use the operating element (knob) to set the nose pad to the desired height, then pull the knob out slightly. This locks the nose pad at the set height.

Yes, it conforms to DIN EN ISO 8429.

The warranty period is one year from delivery, or from acceptance, if acceptance is required.

The UB 4 has a small Phillips screw for adjusting the resistance. The UB 6 has instead a small hexagon socket screw for this purpose (hexagon screwdriver included in delivery).

Universal Trial Frames UB 3+, UB 4, UB 5 and UB 6 are all delivered in a telescopic cardboard box.
This telescopic box has been designed so that it can be used for storing the trial frame in a drawer or together with the refraction unit. It is lined with hard-wearing PE foam to protect the trial frame.

Yes. None of the OCULUS Universal Trial Frames contains latex.

UB 3/UB 3+, UB 4 and UB 5: Three slots in the front lens holder and two in the rear lens holder on either side ⇒ 10 slots altogether

UB 6: Four slots in the front and two in the rear lens holder on either side ⇒ 12 slots altogether.

No, the operating elements differ in design, so they cannot be switched between the UB 6 and UB 4.

No, the operating elements differ in design, so they cannot be switched between the UB 4 and UB 6.

No, the arms differ in design, so they cannot be switched between the UB 6 and UB 4.

No, the arms differ in design, so they cannot be switched between the UB 4 and UB 6.

No, the end-pieces differ in design, so they cannot be switched between the UB 6 and UB 4.

No, the end-pieces differ in design, so they cannot be switched between the UB 4 and UB 6.

No, the nose racks differ in design, so they cannot be switched between the UB 6 and UB 4.

No, the nose racks differ in design, so they cannot be switched between the UB 4 and UB 6.

No, each polarizing filter is fine-tuned to the design of the trial frame it is intended for, so it cannot be switched between the UB 6 and UB 4.

No, each polarizing filter is fine-tuned to the design of the trial frame it is intended for, so it cannot be switched between the UB 4 and UB 6.

Yes, the nose pads of these two models are interchangeable.

No, each lens holder is designed to precisely match the trial frame it is intended for, so the lens holders cannot be switched between the UB 4 and UB 6.

Yes, provided that the UB 4 has round operating elements only. They do not fit on older UB 4 models that have conical operating elements for adjusting pupillary distance.

UB 6: four nose pads in total
UB 5: three nose pads in total
UB 4: three nose pads in total
UB 3+: two nose pads in total

Yes, with the exception of the UB 3.

UB 6: approx. 61 g
UB 5: approx. 48 g
UB 4: approx. 64 g
UB 3: approx. 58 g
UB 3+: approx. 52 g (10 % lighter than the UB 3)
note: specifications are subject to change!

The transparent sighting bar has one scale on its surface and one inside. Take your VD reading when you see the two scales in alignment. The millimetre values on the scale refer to the eye-side vertex of a trial lens located in the first slot of the rear lens holder (next to the trial frame body).

DIN EN ISO 1366 defines VD as follows: absolute value of the distance between the rear surface of the spectacle lens and the corneal apex measured along the line of sight, i.e. orthogonally to the plane of the rim.
The measurement should be taken with the reference lens in the first slot of the rear lens holder (next to the trial frame body).

Contact us!

Request a quote or contact us if you need further information.

Request a quoteContact requestHotline

By using this form I acknowledge that I have read and understood the Terms and Conditions
and agree to be bound by them.
By using this form I acknowledge that I have read and understood the Terms and Conditions
and agree to be bound by them.

Questions?
Get in touch with us.

Tel. +49 641 2005-800